Compare Hardware

Compare the details. Find your fit.

2 products

Side-by-side comparison

AI insights

Buyer advice

Preparing AI insights

Overview
Price

$2.60

€139.00

AvailabilityNot specifiedNot specified
CockpitSquare overviewA toggle switch sold as a standalone flight-simulation hardware component. It is described as an ON-MON switch that can also be used as an OFF-MON switch, with the product page identifying it as an F-18/Hornet switch.A panel-mount, two-position SPDT toggle switch with a locking lever and solenoid-held momentary position. The product is intended for flight-simulation cockpit panels and DIY electronics, with a currently listed 12V configuration and supplied mounting hardware.
Aircraft
F/A-18
F/A-18
Aviation category
Military Aircraft
Military Aircraft
Compatibility & connections
Supported simulatorsNot specifiedNot specified
ConnectionsNot specifiedPanel connector: KF2510 5P wire-to-board connector; 5P 2.54mm DIP header Logic interface: ARM input and open-drain ON/OFF outputs
Software requirementsNot specifiedExternal pull-up: Required for ON and OFF outputs unless the interface or microcontroller provides internal pull-ups
Physical requirementsNot specifiedSupply voltage: 12V DC ±5% for the currently listed 12V unit Grounding: Switch power supply and interface or microcontroller must share a common ground Panel mounting: M12 × 0.75mm threaded bushing; maximum panel thickness 5mm; recommended minimum 1.5mm
Hardware compatibilityNot specifiedNot specified
Simulator add-on compatibilityNot specifiedMobiFlight: Suitable for platforms such as MobiFlight and similar microcontroller-based systems
Dimensions & details
Product dimensionsNot specifiedMounting bushing: M12 × 0.75mm threaded bushing Panel thickness: Maximum 5mm; recommended minimum 1.5mm
Product weightNot specifiedNot specified
Additional factual detailsProduct code: BTSW-OMO Switch function: ON-MON; can be used as OFF-MON Availability: In stock; usually ships in 1–2 business days Listed price: $2.60Switch function: SPDT, ON-(ON); one maintained position and one momentary spring-loaded position Locking lever: Lever must be pulled approximately 2mm out of the lock before moving to the momentary position Solenoid control: Logic-level ARM input; minimum HIGH level 2.0V DC Electrical life: Solenoid electrical life: minimum 10,000 hours; mechanical life: minimum 10,000 cycles Operating temperature: 0–40°C Included hardware: Stainless steel M12×0.75mm panel bushing, hex nut, washer, tooth-style lock washer and wire-to-board connector lead Safety limitation: For simulated or hobbyist applications; not designed, tested or certified for real aircraft flight-deck equipment