Compare Hardware

Compare the details. Find your fit.

2 products

Side-by-side comparison

AI insights

Buyer advice

Preparing AI insights

Overview
Price

$2.60

€159.00

AvailabilityNot specifiedNot specified
CockpitSquare overviewA toggle switch sold as a standalone flight-simulation hardware component. It is described as an ON-MON switch that can also be used as an OFF-MON switch, with the product page identifying it as an F-18/Hornet switch.A panel-mount, three-position SPDT toggle switch with a locking lever, one solenoid-held momentary position, and one maintained position. The 10-305 configuration is intended for flight-simulation panels and DIY simulator builds and is supplied as a 12V variant.
Aircraft
F/A-18
Not specified
Aviation category
Military Aircraft
Universal / Generic
Compatibility & connections
Supported simulatorsNot specifiedNot specified
ConnectionsNot specifiedConnector: 6P 2.0mm DIP header / PH wire-to-board connector; supplied 15cm lead
Software requirementsNot specifiedNot specified
Physical requirementsNot specifiedSupply voltage: 12V DC ±5% for the listed 12V variant Panel mounting: M12 × 0.75mm threaded bushing; maximum panel thickness 5mm; recommended minimum 1.5mm Electrical installation: DC wiring and installation require knowledge or supervision of DC electrical circuits
Hardware compatibilityNot specifiedPanel mounting: Designed for panel mounting through an M12 × 0.75mm threaded bushing
Simulator add-on compatibilityNot specifiedMobiFlight: Suitable for MobiFlight and similar microcontroller-based systems; compatibility is application-dependent Opencockpits IOCards: May not be compatible because the solenoid and switch circuits share the same ground
Dimensions & details
Product dimensionsNot specifiedNot specified
Product weightNot specifiedNot specified
Additional factual detailsProduct code: BTSW-OMO Switch function: ON-MON; can be used as OFF-MON Availability: In stock; usually ships in 1–2 business days Listed price: $2.60Product reference: 10-305 Switch function: (ON)-OFF-ON: center OFF is maintained; one ON position is momentary, spring-loaded, magnetically held, and locked; the other ON position is maintained and unlocked Locking mechanism: The lever must be pulled out approximately 2mm from the center position before engaging the locked position Solenoid configuration: Single-solenoid configuration; the second ARM input is not connected on part 10-305 Included hardware: Stainless-steel bushing, hex nut, washer, tooth-style lock washer, and wire-to-board connector lead Contact rating: DC 30V, 0.1A microswitch contact rating Operating temperature: 0–40°C Mechanical life: Minimum 10,000 cycles Availability: The product page marks the item out of stock Intended use limitation: For simulator and DIY applications; not designed or certified for real aircraft flight-deck equipment or safety-critical systems