Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From €40.00 | £25.00 |
| Availability | In stock | Not specified |
| CockpitSquare overview | A Boeing 737 weather radar panel replica for flight-simulation cockpits. It uses an acrylic panel with annunciators, knobs, buttons, backlighting, and variant-dependent electronics/connectivity for panel-only, programmable, or USB-ready installation. | A decorative first-officer chronometer panel for a Boeing 737 home cockpit. It is a dummy, non-electronic panel supplied with a backing plate, front glass, and an aluminium ACM back panel. |
| Aircraft | 737 | 737 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Flight simulation software: Generic flight-simulation software support is stated; no specific simulator version is identified. | Not specified |
| Connections | Proprietary: IDC connector on the PCB; a dedicated 12V connector is provided for warm-white backlighting on applicable versions. USB: The Plug and Play version is described as USB-ready. | Not specified |
| Software requirements | Configuration files: The Plug and Play version requires installation of provided configuration files. Programming: The Connect and Play version requires programming through a controller board. | Not specified |
| Physical requirements | 12V power: A 12V adapter is used for backlighting; single-panel products do not include the adapter. | Not specified |
| Hardware compatibility | Controller board: The Connect and Play version must connect to a controller board through the PCB’s IDC pins. IDC connector: Compatibility is explicitly described for hardware accepting IDC connectors and 12V backlighting. | Not specified |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Listed product dimensions: 7 × 15 × 4 cm Panel size: 146 mm × 67 mm | Not specified |
| Product weight | Product weight: 0.1 kg | Not specified |
| Additional factual details | SKU: SB-B7P-WEARADPE Material: Two acrylic sheets: 3 mm base and 5 mm upper front, painted Boeing gray RAL 7011. Included controls: Annunciators, annunciator boxes, knobs, and buttons are included; the exact electronics depend on the selected variant. Backlighting: Warm-white backlighting is available with a dedicated connector on the Cut & Plug and Plug & Play versions. Variants: The page describes Panel Only, Connect and Play, and Plug and Play versions. Panel Only limitation: Panel Only excludes electronic components; switches, rotary switches, encoders, or potentiometers must be purchased separately. | Product type: Dummy chronometer panel Included items: 1 × first-officer dummy chronometer panel; 1 × chronometer backing plate and front glass; 1 × 3 mm aluminium ACM back panel Main material: Plastic panel with aluminium ACM back panel Finish: Professionally sprayed and laser engraved to match Boeing 737 panels Reference: B7371STCP Condition: New Lead time: 7 to 14 working days Listed price: £25.00, no tax |