Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From £25.25 | From €30.00 |
| Availability | In stock | In stock |
| CockpitSquare overview | A Boeing 737 ADF radio panel offered as configurable DIY components or a complete DIY kit. It includes options for the panel, PCB, electronics, displays, resin parts, and backlighting, with assembly and external power requirements varying by selection. | A Boeing 737 VHF radio-panel replica made from layered acrylic, with annunciators, controls, displays, and optional electronics configurations. Depending on the selected variant, it is supplied as a panel-only unit, a programmable connect-and-play unit, or a pre-programmed USB-ready plug-and-play unit. |
| Aircraft | 737 | 737 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Not specified | Flight simulation software: Preferred flight simulation software; no specific simulator or version stated |
| Connections | Rear connector: 16-pin connector | USB: Plug-and-play variant is USB-ready IDC: Backside PCB uses an IDC connector; pin mapping is provided 12 V power: Separate 12V connector for backlighting; adapter not included with single-panel products |
| Software requirements | Not specified | Configuration files: Plug-and-play variant requires installation of the provided configuration files Programming: Connect-and-play variant requires programming |
| Physical requirements | Assembly: Through-hole soldering is required for the 7-segment displays, dual encoder, and tactile switches. Displays: Panel Set excludes 7-segment displays; PCB Only requires two 5-digit 7-segment displays. Power: 5V from an Arduino or external supply; separate 12V DC input for backlighting. Common ground and correct polarity required. Mounting hardware: Mounting screws are not included with the Complete DIY Kit; M4 x 14mm countersunk hex-head screws are recommended. | 12V power adapter: Required for backlighting; not included with single-panel products Controller board: Required for the connect-and-play variant |
| Hardware compatibility | Arduino: Arduino-compatible | Controller boards: Connect-and-play version connects through the panel PCB's IDC pins |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Not specified | Overall dimensions: 7 × 15 × 8 cm Panel dimensions: 146 mm × 67 mm |
| Product weight | Not specified | Weight: 0.2 kg |
| Additional factual details | Product type: DIY kit or component options for a Boeing 737 ADF radio panel. Panel finishes: Boeing Grey or Boeing Brown. Available options: Panel Set, PCB Only, PCB + Electrical Components, Resin Set, and Complete DIY Kit. Included electronics: Depending on selection, the product may include a dual encoder, switches, displays, and other essential components. | Construction: Layered acrylic construction with a 3 mm lower base and 5 mm upper front sheet Controls: Annunciators, push buttons, rotary knobs, and switch-related components are described Displays: Red 7-segment displays for VHF readouts Backlighting: Warm-white backlighting for the panel and buttons Available variants: Panel Only, Connect and Play, and Plug and Play, with selectable lighting colors including amber, red, and white Panel-only contents: Front and back panels, annunciators, knobs, and switch guards; electronic components are excluded Knobs: Resin 3D-printed knobs with D-shaft fitting Lighting power: The 12V supply powers backlighting only, not the product's core functions |