Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | €89.00 | £3.50 |
| Availability | Not specified | Not specified |
| CockpitSquare overview | A panel-mount, two-position SPDT toggle switch with one maintained position and one momentary position that can be held magnetically by an integrated solenoid. It is intended for flight-simulation cockpit panels and DIY electronics installations. | A heavy-duty ON/OFF/ON toggle switch intended for flight-simulator MIP and overhead panel builds. The product includes a mounting nut and has a stated 11.5 mm mounting-hole requirement. |
| Aircraft | 737 | Not specified |
| Aviation category | Airliners | Universal / Generic |
| Compatibility & connections | ||
| Supported simulators | Microsoft Flight Simulator X: Microsoft Flight Simulator X MSFS 2020: Microsoft Flight Simulator 2020 Prepar3D: P3D ProSim: Prosim 738 Other: Mobiflight with FSUIPC | Not specified |
| Connections | Terminals: 5-position 2.54 mm DIP header and KF2510 connector Power and control pins: GND, VCC, ARM, ON and OFF pins | Not specified |
| Software requirements | Mobiflight: Required for the documented Mobiflight configuration FSUIPC: Required for the documented Mobiflight configuration Prosim: Required for the documented Prosim configuration | Not specified |
| Physical requirements | DC power supply: 5.0–5.5 V DC for the 5 V variant, or 12 V DC ±5% for the 12 V variant Panel installation: M12 × 0.75 mm threaded bushing; maximum panel thickness 5 mm; recommended minimum 1.5 mm External pull-up: Required for the open-drain ON and OFF outputs unless the interface provides an internal pull-up Electrical installation: Installation and wiring require knowledge of DC electrical circuits | Mounting hole diameter: 11.5 mm |
| Hardware compatibility | Mobiflight module: Supported in the documented configuration Arduino Mega: Used in the documented Mobiflight configuration Pokeys I/O card: Supported in the documented Prosim configuration | Not specified |
| Simulator add-on compatibility | PMDG 737NG: Documented with Mobiflight and FSUIPC Prosim 738: Documented for Boeing 737 aircraft avionics | Not specified |
| Dimensions & details | ||
| Product dimensions | Not specified | Base dimensions: 29.5 × 13.5 mm |
| Product weight | Not specified | Not specified |
| Additional factual details | Electrical contact type: Single Pole Double Throw (SPDT) Switch function: ON-(ON): one maintained position and one momentary spring-loaded position Solenoid function: The momentary position is magnetically held by a small holding solenoid Reference: 10-201 Variants: 10-201 standard lever with brass bushing; 10-202 locking lever with stainless-steel bushing Throw angle: 30 degrees Operating temperature: 0–40 °C Mechanical life: Minimum 10,000 cycles Solenoid electrical life: Minimum 10,000 operating hours Availability: In stock; 9 items shown on the product page Safety limitation: Not designed, tested or certified for real aircraft flight-deck equipment or safety-critical applications | Switch positions: ON/OFF/ON Intended application: MIP and overhead simulator panels Included item: 1 × ON/OFF/ON switch with mounting nut Reference: HDSONOFFON Condition: New Listed price: £3.50, excluding tax as displayed |