Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From £3.29 | From €27.00 |
| Availability | In stock | In stock |
| CockpitSquare overview | A DIY parts package for constructing a backlit 737 autobrake panel. It includes laser-engraved acrylic panel components and smaller MFD/button faceplates; 3D-printed parts are required for a fully functional unit. | A Boeing 737 ELT overhead-panel replica for flight-simulation cockpits. It is offered as Panel Only, Connect and Play, or Plug and Play, with annunciators, controls, backlighting, and an integrated PCB depending on the selected variant. |
| Aircraft | 737 | 737 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Not specified | Flight simulation software: Preferred flight simulation software; no specific simulator named |
| Connections | Not specified | IDC connector: Rear PCB IDC connector for panel functions and controller-board wiring USB: Plug and Play variant is USB-ready 12V connector: Dedicated 12V connector for backlighting; single-panel products do not include a power adapter |
| Software requirements | Not specified | Plug and Play configuration files: Provided configuration files must be installed for the Plug and Play variant Programming: Required for the Connect and Play variant |
| Physical requirements | 3D-printed parts: Required for a fully functional unit | Controller board: Required for the Connect and Play variant 12V power adapter: Required for backlighting but not included with single-panel products |
| Hardware compatibility | Not specified | Controller boards: Connect and Play version connects to a controller board via the rear IDC pins |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Not specified | Product dimensions: 7 × 16 × 7 cm Panel face size: 146 mm × 57 mm |
| Product weight | Not specified | Weight: 0.1 kg |
| Additional factual details | Product type: DIY construction parts for an autobrake panel Panel materials: Front panel: 3 mm white acrylic; back and mid panels: 2 mm clear acrylic Lighting: Panel components are designed for backlighting; the back panel and mid panel are painted around the edges to reduce light spill Included components: Smaller MFD panel and button faceplates are included MFD PCB update: A small PCB for the MFD panel includes onboard backlighting resistors | Variants: Panel Only, Connect and Play, and Plug and Play Construction: 3 mm bottom acrylic layer and 5 mm upper front plate, painted Boeing gray RAL 7011 Controls and indicators: Annunciators, annunciator boxes, push controls, rotary controls, knobs, and buttons are included; contents vary by selected variant Backlighting: Warm-white backlighting Daisy chaining: Panels can be daisy-chained using their power connectors; one adapter can power the custom cockpit setup Knob construction: Resin 3D-printed knobs with D-shaft fitting Price: €27.00–€100.00 excluding tax; variant-dependent Estimated delivery: May 22, 2026 – August 4, 2026 |