Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | €5.00 | €1.00 |
| Availability | Not specified | In stock |
| CockpitSquare overview | A set of four 2x8P PHD 2.0 mm double-row wire-to-board connectors with attached wire leads. The connectors are intended as supplemental wiring for compatible input and output expander boards, with selectable wire length and common-wire color configuration. | A male DC power connector with a 2.5 mm inner diameter and 5.5 mm outer diameter for wiring flight-simulation electronics and compatible power jacks. The connector is intended for DC power connections and requires wire soldering based on device polarity. |
| Aircraft | Not specified | Not specified |
| Aviation category | Universal / Generic | Universal / Generic |
| Compatibility & connections | ||
| Supported simulators | Not specified | Not specified |
| Connections | Connector type: 2x8P PHD 2.0 mm wire-to-board connector | Interface: DC power connector; 2.5 mm inner diameter / 5.5 mm outer diameter |
| Software requirements | Not specified | Not specified |
| Physical requirements | Not specified | Installation: Solder wires to the connector terminals according to device polarity, then plug into a compatible 5.5 mm power jack |
| Hardware compatibility | Compatible equipment: Output and input expander boards | Compatible equipment: Devices using a 2.5 mm inner / 5.5 mm outer diameter DC jack, including Mega2560 boards |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Wire lead length: 200 mm or 500 mm | Electrical connector dimensions: 2.5 mm inner diameter; 5.5 mm outer diameter |
| Product weight | Not specified | Not specified |
| Additional factual details | Quantity: Set of 4 pieces Pin arrangement: Double row, 2 x 8 wires Wire gauge: UL1061 or UL1007 24 AWG, depending on availability Common-wire color options: Black for common cathode board and input shift register; red for common anode board Signal-wire colors: Purple, orange, green, brown, blue, yellow, grey, and white Cable mounts: 10 self-adhesive zip tie cable mounts included with the 500 mm version only Availability shown: In stock; 40 items | Power purpose: Designed exclusively for DC power supply connections, not data transmission SKU: 5000061 Polarity: Connector terminals separate positive and negative poles Product type: Simple, purchasable product |