Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From €70.00 | From $550.00 |
| Availability | In stock | In stock |
| CockpitSquare overview | A Boeing 737 center-gauge and yaw-damper MIP panel replica made from painted acrylic sheets, with annunciators, knobs, buttons, and—depending on the selected version—a servo-driven backlit yaw-damper gauge. Options include panel-only, controller-connected, and pre-programmed USB-ready configurations. | A compact Airbus-style MIP panel intended for desktop flight-simulator setups. The product is offered with optional mounting-plate and table-stand-mount configurations. |
| Aircraft | 737 | A320 |
| Aviation category | Airliners | Universal / Generic |
| Compatibility & connections | ||
| Supported simulators | Flight simulation software: Generic support stated for the Plug and Play version; no specific simulator names or versions identified | Not specified |
| Connections | USB: Plug and Play version is USB-ready Proprietary: Connect and Play version connects through IDC connector pins on the rear PCB to a controller board Other: Panel Only version has no electronic connection supplied; electronic components are excluded | Not specified |
| Software requirements | Configuration files: Provided configuration files must be installed for the Plug and Play version Programming: Required for the Connect and Play version Calibration: Gauge calibration must be performed through software or firmware | Not specified |
| Physical requirements | Controller board: Required for the Connect and Play version Electronic components: Panel Only version requires separately purchased switches, toggle switches, rotary switches, encoders, or potentiometers 12V power adapter: Not included with single-panel products; used for backlighting in a daisy-chained setup | Mounting configuration: Optional mounting plate and optional table stand mount |
| Hardware compatibility | Controller boards: The gauge's SG90 servo motors are stated to be compatible with most available controller boards SG90 servo motors: Gauge uses SG90 servo motors; one or two are pre-mounted per unit | Not specified |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Panel size: 103 mm × 351 mm; third dimension not stated Catalog-listed dimensions: 5 × 5 × 8 cm; page does not clarify the measurement basis | Product dimensions: 50 × 20 × 9 cm |
| Product weight | Weight: 0.2 kg | Product weight: 3.5 kg |
| Additional factual details | Construction: Two acrylic sheets: 5 mm lower layer and 3 mm upper front layer Finish: Painted Boeing gray, RAL 7011 iron gray Controls: Annunciators, annunciator boxes, knobs, push buttons, and rotary controls are included in the described replica Yaw-damper gauge: Servo-driven and warm-white backlit in the Connect and Play and Plug and Play versions PCB: No PCB is included in the described panel replica Knob fitting: Knobs use a D-shaft fitting Gauge alternatives: Where specified, 28BY stepper motors with a ULN2003 driver board may be used | Product style: Airbus-style desktop series Price range: 550.00$–592.00$ Mounting plate options: Non-mounting-plate configuration or add mounting plate for +12$ Table stand mount options: Non-table-stand-mount configuration or add table stand mount for +30$ SKU: N/A |