Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From €70.00 | €84.90 |
| Availability | In stock | Not specified |
| CockpitSquare overview | A Boeing 737 center-gauge and yaw-damper MIP panel replica made from painted acrylic sheets, with annunciators, knobs, buttons, and—depending on the selected version—a servo-driven backlit yaw-damper gauge. Options include panel-only, controller-connected, and pre-programmed USB-ready configurations. | A made-to-order captain-side A320 home-cockpit panel for the HP panel and MIP aeration area. The product uses a 6 mm face, a 3 mm counter face, a laser-cut PMMA grid, and a 3D-printed dummy aeration nozzle. |
| Aircraft | 737 | A320 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Flight simulation software: Generic support stated for the Plug and Play version; no specific simulator names or versions identified | Not specified |
| Connections | USB: Plug and Play version is USB-ready Proprietary: Connect and Play version connects through IDC connector pins on the rear PCB to a controller board Other: Panel Only version has no electronic connection supplied; electronic components are excluded | Not specified |
| Software requirements | Configuration files: Provided configuration files must be installed for the Plug and Play version Programming: Required for the Connect and Play version Calibration: Gauge calibration must be performed through software or firmware | Not specified |
| Physical requirements | Controller board: Required for the Connect and Play version Electronic components: Panel Only version requires separately purchased switches, toggle switches, rotary switches, encoders, or potentiometers 12V power adapter: Not included with single-panel products; used for backlighting in a daisy-chained setup | Not specified |
| Hardware compatibility | Controller boards: The gauge's SG90 servo motors are stated to be compatible with most available controller boards SG90 servo motors: Gauge uses SG90 servo motors; one or two are pre-mounted per unit | Not specified |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Panel size: 103 mm × 351 mm; third dimension not stated Catalog-listed dimensions: 5 × 5 × 8 cm; page does not clarify the measurement basis | Not specified |
| Product weight | Weight: 0.2 kg | Not specified |
| Additional factual details | Construction: Two acrylic sheets: 5 mm lower layer and 3 mm upper front layer Finish: Painted Boeing gray, RAL 7011 iron gray Controls: Annunciators, annunciator boxes, knobs, push buttons, and rotary controls are included in the described replica Yaw-damper gauge: Servo-driven and warm-white backlit in the Connect and Play and Plug and Play versions PCB: No PCB is included in the described panel replica Knob fitting: Knobs use a D-shaft fitting Gauge alternatives: Where specified, 28BY stepper motors with a ULN2003 driver board may be used | SKU: PHPAA320C Construction status: Made to order Face thickness: 6 mm Counter-face thickness: 3 mm Grid material/process: Laser-cut PMMA grid Aeration nozzle: 3D-printed dummy aeration nozzle Listed color option: AIRBUS REPLICA color Listed price: €84.90, tax included |