Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | A$130.00 | €139.00 |
| Availability | In stock | Not specified |
| CockpitSquare overview | A functioning mechanical wing-fold switch assembly for an F/A-18 cockpit simulation setup. It provides tactile lever movement, mounts with two M4 screws, and requires an F18 Right Control Board or a custom controller for operation. | A panel-mount, two-position SPDT toggle switch with a locking lever and solenoid-held momentary position. The product is intended for flight-simulation cockpit panels and DIY electronics, with a currently listed 12V configuration and supplied mounting hardware. |
| Aircraft | F/A-18 | F/A-18 |
| Aviation category | Military Aircraft | Military Aircraft |
| Compatibility & connections | ||
| Supported simulators | DCS World: Plug-and-play operation requires the F18 Right Control Board. | Not specified |
| Connections | Other: Custom-controller wiring uses GND and four input pins. | Panel connector: KF2510 5P wire-to-board connector; 5P 2.54mm DIP header Logic interface: ARM input and open-drain ON/OFF outputs |
| Software requirements | Not specified | External pull-up: Required for ON and OFF outputs unless the interface or microcontroller provides internal pull-ups |
| Physical requirements | Mounting: Requires two M4 screws into the unit body. | Supply voltage: 12V DC ±5% for the currently listed 12V unit Grounding: Switch power supply and interface or microcontroller must share a common ground Panel mounting: M12 × 0.75mm threaded bushing; maximum panel thickness 5mm; recommended minimum 1.5mm |
| Hardware compatibility | F18 cockpit panels: Compatible with F18 cockpit panels. F18 Right Control Board: Required for plug-and-play operation. | Not specified |
| Simulator add-on compatibility | Not specified | MobiFlight: Suitable for platforms such as MobiFlight and similar microcontroller-based systems |
| Dimensions & details | ||
| Product dimensions | Not specified | Mounting bushing: M12 × 0.75mm threaded bushing Panel thickness: Maximum 5mm; recommended minimum 1.5mm |
| Product weight | Not specified | Not specified |
| Additional factual details | Construction: Full mechanical wing-fold assembly with authentic tactile action. Finish: Supplied raw and unpainted for custom finishing. Fulfillment: In stock; items are built to order. Price shown: 130.00 Australian dollars on the consulted page. | Switch function: SPDT, ON-(ON); one maintained position and one momentary spring-loaded position Locking lever: Lever must be pulled approximately 2mm out of the lock before moving to the momentary position Solenoid control: Logic-level ARM input; minimum HIGH level 2.0V DC Electrical life: Solenoid electrical life: minimum 10,000 hours; mechanical life: minimum 10,000 cycles Operating temperature: 0–40°C Included hardware: Stainless steel M12×0.75mm panel bushing, hex nut, washer, tooth-style lock washer and wire-to-board connector lead Safety limitation: For simulated or hobbyist applications; not designed, tested or certified for real aircraft flight-deck equipment |