Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From £3.29 | From €25.00 |
| Availability | In stock | In stock |
| CockpitSquare overview | A DIY parts package for constructing a backlit 737 autobrake panel. It includes laser-engraved acrylic panel components and smaller MFD/button faceplates; 3D-printed parts are required for a fully functional unit. | A Boeing 737 first-officer display-unit cockpit panel replica with annunciators, push buttons, rotary knobs, and warm-white backlighting. Depending on the selected variant, it is supplied as a panel-only set, a controller-board-connected unit requiring programming, or a pre-programmed USB-ready version. |
| Aircraft | 737 | 737 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Not specified | Microsoft Flight Simulator: Generic MSFS support is indicated by installation instructions; version not specified. X-Plane: Generic X-Plane support is indicated by installation instructions and a Lua script; version not specified. |
| Connections | Not specified | IDC connector: Rear PCB IDC connector with assigned pins for annunciators and controls; applicable to the Connect and Play variant. 12V power: Dedicated 12V input for backlighting; the power supply is used solely for backlighting. USB: The Plug and Play variant is described as USB-ready. |
| Software requirements | Not specified | Configuration files: The Plug and Play variant requires installation of provided configuration files. Programming: The Connect and Play variant requires programming after connection to a controller board. X-Plane Lua script: An X-Plane Lua script is provided as a downloadable installation resource. |
| Physical requirements | 3D-printed parts: Required for a fully functional unit | Controller board: Required for the Connect and Play variant; the panel connects through the rear PCB IDC pins. 12V power adapter: A 12V adapter is needed for panel backlighting, but a single-panel product does not include one. |
| Hardware compatibility | Not specified | Controller boards: The Connect and Play version is intended to connect to a controller board through the IDC connector; no specific board model is named. |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Not specified | Listed product dimensions: 5 × 5 × 8 cm Panel size: 65 mm × 120 mm |
| Product weight | Not specified | Weight: 0.2 kg |
| Additional factual details | Product type: DIY construction parts for an autobrake panel Panel materials: Front panel: 3 mm white acrylic; back and mid panels: 2 mm clear acrylic Lighting: Panel components are designed for backlighting; the back panel and mid panel are painted around the edges to reduce light spill Included components: Smaller MFD panel and button faceplates are included MFD PCB update: A small PCB for the MFD panel includes onboard backlighting resistors | Construction: 3 mm thick acrylic sheet painted in iron gray, RAL 7011. Controls and indicators: Includes annunciators, annunciator boxes, functional push buttons, and rotary knobs. Backlighting: Warm-white backlighting is provided. Included documentation: A connection data sheet is included or labeled on the PCB. Variants: Product options include Panel Only, Connect and Play, and Plug and Play; included electronics and setup differ by variant. SKU: SB-B7M-FODU |