Compare Hardware
Compare the details. Find your fit.
2 productsSide-by-side comparison |
|---|
AI insights
| Buyer advice | Preparing AI insights | |
|---|---|---|
| Overview | ||
|---|---|---|
| Price | From €60.00 | From £3.29 |
| Availability | In stock | In stock |
| CockpitSquare overview | A Boeing 737 overhead flight-control panel replica with annunciators, rotary knobs, push buttons, and warm-white backlighting. Depending on the selected variant, it is supplied as a panel-only assembly, a functional unit requiring a controller board and programming, or a pre-programmed USB-ready version. | A DIY parts package for constructing a backlit 737 autobrake panel. It includes laser-engraved acrylic panel components and smaller MFD/button faceplates; 3D-printed parts are required for a fully functional unit. |
| Aircraft | 737 | 737 |
| Aviation category | Airliners | Airliners |
| Compatibility & connections | ||
| Supported simulators | Flight simulation software: Generic compatibility stated for the Plug and Play variant; specific simulator names or versions are not identified. | Not specified |
| Connections | USB: Plug and Play variant is USB-ready. Proprietary: The functional Connect and Play variant uses an IDC connector with labeled pin assignments. Other: Warm-white backlighting uses a dedicated 12 V power connector. | Not specified |
| Software requirements | Configuration files: The Plug and Play variant requires installation of provided configuration files. Programming: The Connect and Play variant requires programming. | Not specified |
| Physical requirements | Controller board: Required for the Connect and Play variant. 12 V power adapter: Used for backlighting; a single-panel product does not include an adapter. | 3D-printed parts: Required for a fully functional unit |
| Hardware compatibility | Controller boards: Connect and Play variant is designed to connect to a controller board via the rear IDC connector. | Not specified |
| Simulator add-on compatibility | Not specified | Not specified |
| Dimensions & details | ||
| Product dimensions | Listed product dimensions: 7 × 18 × 16 cm Detailed panel size: 146 mm × 209 mm | Not specified |
| Product weight | Weight: 0.3 kg | Not specified |
| Additional factual details | Variants: Available as Panel Only, Connect and Play, or Plug and Play. Panel construction: Two acrylic layers: 5 mm front and 3 mm rear, painted Boeing gray RAL 7011. Included controls: Annunciators, annunciator boxes, rotary knobs, push buttons, and switch guards are described for the relevant variants. Backlighting: Warm-white backlighting is provided for low-light use and is powered separately from the product's core functions. Panel-only limitation: Panel Only excludes electronic components; switches, rotary switches, encoders, or potentiometers must be purchased separately. Knob fitting: Knobs are resin 3D-printed and use a D-shaft fitting. | Product type: DIY construction parts for an autobrake panel Panel materials: Front panel: 3 mm white acrylic; back and mid panels: 2 mm clear acrylic Lighting: Panel components are designed for backlighting; the back panel and mid panel are painted around the edges to reduce light spill Included components: Smaller MFD panel and button faceplates are included MFD PCB update: A small PCB for the MFD panel includes onboard backlighting resistors |